How To Clean A Range Hood Grease Filter
Jul 04, 2023
Remove the filters from the hood: Most filters should simply slide or pop out of the hood's underside.
Fill a sink or bucket halfway with boiling water: the hotter the water, the better. That may be sufficient depending on how hot the water from your tap is. I boiled water in my electric tea kettle and poured it into the sink for myself.
Mix in the baking soda and dish soap: Pour in a generous squirt of degreasing dish soap and 1/4 cup baking soda. Swish the water around with a brush until it's nice and soapy.
Place the Range Hood Grease Filters in the water: Put your filthy exhaust fan filters in the water. Make certain that they are completely covered.
Allow them to soak: Soak the filters for 10 minutes.
Scrub the filters: After soaking, scrub the filters with a non-abrasive scrub brush. If necessary, add more dish soap to your brush as you scrub.
Rinse and dry: Thoroughly rinse the filters in hot water and dry with a paper towel or clean cloth.
Replace the filters as necessary: Replace the filters in the hood and repeat as needed! A good maintenance strategy is to clean the filters once a month.




